RELATED APPLICATIONS
Features
Overview
Indeco HP hydraulic hammers are an outstanding expression of Italian high-tech and construction quality applied to demolition. In-depth research into hydraulic systems, materials, heat treatment and accessories have enabled Indeco to establish a reputation on markets throughout the world for product excellence.
With its many different models, divided into large, medium and small and available in various versions, Indeco has the widest range of hammers available anywhere in the world. This provides end-users with a huge choice, ensuring that they can find the ideal hammer/excavator match.
Small hammers
Despite their compact size, Indeco’s range of small hammers are exceptionally reliable, quiet and efficient, and best suited for such jobs as excavations work, highway maintenance, demolitions and recycling in city areas and building refurbishment.
Their versatility makes them extremely efficient in specialist jobs such as maintenance in iron foundries.
Medium hammers
Their excellent weight/power ratio and their slimline structure make the mid-range Indeco hammers the ideal choice for classical applications, such as demolishing buildings, earthworks in inhabited areas and secondary demolitions in quarries, as well as for more specific tasks.
In fact, mid-range hammers are used for underwater work (using a special kit) as well as for digging narrow deep trenches and removing casting slag from blast furnaces.
Large hammers
Combining maximum power with the effectiveness of intelligent technology, Indeco’s larger hammers are unbeatable when it comes to completing the toughest jobs in the shortest possible time-frame – whether it’s the biggest demolition jobs, primary breaking in quarries, digging foundations, or excavating huge rail and road tunnels.
Technical Features
Click an item of the following list to zoom in it
- 1 Intelligent hydraulic system
- 2 The synchronised internal distributor and piston maintain the same axial line
- 3 Oil cushion to reduce harmful low frequency shock waves
- 4 Short hydraulic flow pattern with dynamic sealing
- 5 Casing in HARDOX© steel
- 6 Piston
- 7 Centralised greasing point
- 8 Quick-change bushing replaceable on site
- 9 Lower shock absorber to reduce the axial stress between the hammer
- 9 Side shock absorbers to reduce radial vibration and noise level
- 9 Upper shock absorber to reduce axial vibration transmitting to the excavator boom
- 10 Internal sound-absorbent lining in super-soundproofed Whisper versions and independent housing
- 10 Wear and sound deadening plates
- 11 Rechargeable nitrogen accumulator
- 12 ABF System to eliminate blank firing
- 13 FS hydraulic system for lower fuel consumption
HAMMERS PRODUCTIVITY CALCULATION
EXPLORE OUR
HYDRAULICS HAMMERS
0,5 ÷ 2 ton
59 Kg
42 mm
0,7 ÷ 3 ton
80 Kg
45 mm
0,7 ÷ 3 ton
98 Kg
45 mm
1,4 ÷ 5 ton
160 Kg
48 mm
1,7 ÷ 6,5 ton
230 Kg
65 mm
3 ÷ 9 ton
320 Kg
75 mm
3,5 ÷ 10,5 ton
390 Kg
75 mm
4 ÷ 12 ton
440 Kg
80 mm
5 ÷ 14 ton
550 Kg
90 mm
6,5 ÷ 16 ton
650 Kg
90 mm
10 ÷ 20 ton
850 Kg
110 mm
12 ÷ 22 ton
1000 Kg
115 mm
15 ÷ 25 ton
1200 Kg
120 mm
16 ÷ 28 ton
1500 Kg
130 mm
16 ÷ 30 ton
1690 Kg
135 mm
19 ÷ 32 ton
1900 Kg
140 mm
21 ÷ 38 ton
2200 Kg
145 mm
23 ÷ 42 ton
2500 Kg
150 mm
27 ÷ 50 ton
3150 Kg
160 mm
30 ÷ 55 ton
3600 Kg
170 mm
32 ÷ 63 ton
4000 Kg
180 mm
39 ÷ 80 ton
5000 Kg
195 mm
45 ÷ 120 ton
7800 Kg
215 mm
60 ÷ 140 ton
11050 Kg
250 mm
- HP 100 FSsmall
- HP 150 FSsmall
- HP 150 FS Heavy Dutysmall
- HP 200 FSsmall
- HP 400 FSsmall
- HP 550 FSsmall
- HP 600 FSsmall
- HP 700 FSsmall
- HP 900 FSsmall
- HP 1200 FSmedium
- HP 1500 FSmedium
- HP 1800 FSmedium
- HP 2000 FSmedium
- HP 2500 FSmedium
- HP 2750 FSmedium
- HP 3000 FSmedium
- HP 3500 FSlarge
- HP 4000 FSlarge
- HP 5000 FSlarge
- HP 6000 FSlarge
- HP 7000 FSlarge
- HP 9000 FSlarge
- HP 12000 FSlarge
- HP 18000 Plus FSlarge
Accessories
A set of accessories and special components to complete our tools in order to meet all of your possible needs.
Indeconnect
The ‘Indeconnect’ system consists of a device equipped with 4G technology for a wireless connection to the network, to be mounted on the equipment, and a cloud-based web platform you can access from mobile devices (with an app) or from PC, that lets you view the data transmitted in real time by each installed device: working hours, working position in space, hydraulic oil temperature, ambient temperature, GPS position, and more.
Close
IDA (Indeco Dust Abatement) System
An innovative system that is particularly effective for reducing wear and tear on components, extending the working life of the hammer and protecting operators against exposure to microparticles of crystalline silica. It consists of a jet of high-pressure water spray, emitted by a number of nozzles on the casing, which prevents dust from harming both the tool and the operator. Recently updated to comply with the latest OSHA directives, the system is available in two different versions:
Close
High-pressure system
Available for medium-large to large hammers, it is made up of an air compressor and a high-pressure water pump, mounted onto the excavator and driven by two hydraulic motors powered by the excavator. A set of electrohydraulic valves enable the excavator operator to activate the pump and compressor independently, thus starting up either one or both of the protection devices: the dust-abatement kit, which uses a fine water spray and the dust shield, which uses the internal pressurization of the hammer to prevent dust, water and debris from getting into the hammer through the bushing, as can occur during tunnel demolitions and underwater excavations.
Close
Low-pressure system
Designed for smaller hammers and pulverizers, the technology involves inserting a vaporizing plate with four nozzles, where the mounting bracket is attached, which enables it to cover the whole working area (whatever position it is in) and reduce the amount of dust produced, even on windy days. The new system only needs a low-pressure water supply and the sprayers turn on automatically only when the attachment is in action, thus also reducing water consumption.
Close
Anti-Grease and Anti-Dust System
This system, which is crucial when working in dusty environments and when tunnelling, is made up of two collars. Both are adherent to the tool, and which prevent dust from getting in and grease from getting out, improving lubrication levels and thus lengthening the working life of the main hammer components.
Close
Indeco Lube automatic greasing systems
Among the most important accessories on hydraulic hammers, automatic greasing systems developed exclusively for Indeco by Bekalube technical staff are designed to keep hammers in perfect working order, by using just the right amount of lubricant and cutting out the down times needed for the operator to carry out manual greasing. There are two types of greasing unit – either an on-board system that can be fitted directly onto the hammer and which uses a cartridge pump, or else an excavator-mounted unit with its own grease tank.
Close
Carrier-mounted systems
In both cases, these systems are connected to the hammer through a single centralized greasing point, which enables the lubricant to reach all of the bushings and the moving parts at the tool, inside the hammers and on the retaining axle.
Carrier-mounted systems
- Five-litre hydraulically or electrically-operated tank
- 18/20 kg hydraulically or electrically-operated drum immersion pump
On-Board greasing systems - Small
Single-shot cartridge pump with only one hydraulic line, which accepts a single 250 or 400 g cartridge – for hammers from the HP 550 to the HP 1800
Close
Special Indeco Sirio lubricant
It is vital that a specific lubricant be used, to ensure the durability of the main components of the hammer. Indeco's Sirio HBS grease, with solid additives is particularly resistant to oxidation, can withstand extreme pressures and temperatures and shows excellent adhesion and water-resistance.
Close
The tools
Chisel tool
Suitable for all earthworking or narrow-section excavation jobs on medium to hard stratified rock.
Moil point tool
Suitable for breaking up concrete, or medium-hard non-stratified rock. Secondary demolition: average, hard or extremely hard blocks.
Asphalt cutter/shovel tool
For cutting or breaking the road surface, breaking floors, walls, brick or tuff walls. Available in the in-line (asphalt cutter) and 90° transversal (shovel) versions according to the working direction.
Pile driver
Suitable for pilework or press-moulded supports for guardrails, etc.
Pyramidal point
Suitable for demolishing hard reinforced concrete flooring, as well as sedimentary material.
Cobra chisel tool
Suitable for all types of excavation work on medium-hard to hard rock, non-stratified rock or rock which tends to pulverise when being broken up, puddingstones.
Blunt tool
Suitable for breaking up blocks of any hardness, or to reduce the size of rubble.
Our Tools in Real Life
